he Koller C2 is a flexible and high-performance flight platform for photographers and filmmakers who use high-quality cameras to take aerial photos. Be it flight times of up to 40 minutes or payloads of up to 5 kg: The Koller C2 can be optimally adjusted to different needs and thus solves every task with flying colors. You can control the Koller C2 using a tablet and pre-programmed routes, traditionally using a remote control with a pilot or with a pilot and cameraman.
- Maximum take-off weight: 12 to 14 kg
- Payload: 4 to 5 kg
- Cameras up to 2.5 kg
- Diameter: 1050 mm
- Propeller: 8x 15 “x 5
- Battery holders: ideally 20,000 mAh (2x 10,000 mAh), max. 64,000 mAh (4x 16,000 mAh)
- Flight time: ideally 15 to 20 min, max 40 min
Stable and light carbon frame with foldable arms and electrically foldable landing gear.
- Reinforced landing gear
- Transport case
- Dual configurations
Robust Koller G1 3-axis brushless gimbal with variable and quickly adjustable camera mount for all common photo and video cameras, thermal imaging cameras and multispectral cameras up to 2.5 kg. The interface for controlling the camera shutter, zoom, etc. is matched to the cameras used.
8 brushless brand motors with long service life and high efficiency, carbon propeller 15 “x 5
- Motors insensitive to water and dirt
Battery suspension for 2 batteries, ideally 2x 10,000 mAh, max. 2x 16,000 mAh. We recommend Swaytronic Batteries with XT90 lightning protection plugs.
- Battery suspension for 4 batteries, max. 4x 16,000 mA
The 3DR Pixhawk Flight controller is a versatile and reliable companion for many flight tasks. The uBlox GPS guarantees perfect GPS satellite recognition. Telemetry data such as flight altitude and battery level are transmitted to the ground with a 433 MHz downlink.
- Zero UAV Gemini redundant control
- DJI A2 or Wookong M
Sensors increase flight safety and flight comfort. In addition to the classic telemetry sensors, sonar and laser sensors are also available, which are used to avoid collisions.
- Sonar distance warning up to 7m
- Lidar distance warning up to 40m
- Flow sensor
- Telemetry data
- Single cell monitoring
- Redundant transmitter / receiver
- Main switch
With Mission Planner software, complete flights can be prepared and carried out automatically on site.
Pixhawk compatible Mission Planner software:
Selection of possible cameras
The Koller C2 is suitable for many camera systems.
“Capturing structures with the multicopter”[gview file=”http://www.koller.engineering/wp-content/uploads/2015/08/koller_flyer_Erfassung-von-Strukturen-mit-dem-Multicopter1.pdf” height=”200px” save=”1″]